TRAILER WHEELS AND TYRES 8"-12" Aline Trading present a range of small diameter (8”-12”) wheels and tyres suitable for a wide range of applications including, small trailers, agricultural machinery & Industrial equipment.
The wheel range is divided into 2 sections.
1. Single piece hub mount wheels. These wheels have a hub mount centre and are designed to be used with one of our standard stub axle assemblies. The hub mount makes them more robust and suitable for higher load applications. A maximum speed of 100km/hr. may be obtained on some of these wheels depending on the application and rating of the tyre being fitted.
2. Two piece hub mount wheels. These wheels are supplied with the popular HT Holden or Ford drilling and are based on a 2 piece forklift wheel for additional strength. They are suited to low speed trailers that have a higher load rating and require a low overall wheel height. The thicker centre material offers additional strength both for radial load and the twisting affect encountered when turning a tandem trailer. A range of tyres are available for these wheels, the most popular is our Industrial block pattern.
| SINGLE PIECE HUB MOUNT WHEELS | |||
| Part No | Description | ||
| Diameter | Width | PCD/Fitment | |
| AL03189 | 8" | 3.75" | 4/101.6 - MINI |
| AL03255 | 8" | 3.75" | 4/101.6 - MINI -GALV |
| AL03158 | 8" | 3.75" | 5/114.3 - FORD |
| AL03228 | 8" | 3.75" | 5/107.95 - HT |
| AL03227 | 8" | 5.375" | 4/101.6 - MINI |
| AL03161 | 8" | 5.375" | 5/114.3 - FORD |
| AL03226 | 8" | 5.375 | 5/107.95 - HT |
| AL03225 | 8" | 7.00" | 4/101.6 - MINI |
| AL03224 | 8" | 7.00" | 5/114.3 - FORD |
| AL03353 | 8" | 7.00" | 5/114.3 - FORD - GALV |
| AL03059 | 9" | 4.00" | 5/114.3 - FORD |
| AL03221 | 10" | 6.00" | 4/101.6 - MINI |
| AL03199 | 10" | 6.00" | 5/114.3 - FORD |
| AL03163 | 10" | 8.00" | 4/101.6 - MINI |
| AL03232 | 12" | 10.5" | 5/114.3 - FORD |
| TWO PIECE HUB MOUNT WHEELS - HEAVY DUTY | |||
| Part No | Dimensions | ||
| Diameter | Width | PCD/Fitment | |
| AL03359 | 8" | 3.00" | 5/107.95 - HT HOLDEN |
| AL02839 | 8" | 3.00" | 5/114.3 - FORD |
| AL03358 | 9" | 4.00" | 5/107.95 - HT HOLDEN |
Photo below: 5.00-8 8ply Industrial tyre fitted to 2.50-8 2 piece HT wheel.
The tyres listed below are the most commonly used for our range of stocked wheels above.
Other sizes and tread patterns are available on request.
Note:
- Tyres listed as highway pattern are suitable for on- road use. Speeds may vary.
- Industrial tyres are for low speed use only. Prolonged high speed work will result in tyre failure due to heat build up.
| TYRES TO SUIT ABOVE WHEELS |
||||
| Part No |
Size | Ply | Tread |
capacity KG |
| AL03222 | 13/5.00-6 TL |
6 | TURF | 240 |
| AL03060 | 15/6.00-6 TL |
6 | TURF | 270 |
| AL03160 | 16/6.50-8 TL |
6 | TURF | 355 |
| AL03180 | 16/6.50-8 TL | 4 | LUG | 280 |
| AL03259 | 18/8.50-8 TL |
6 | TURF | 475 |
| AL03187 | 20/10.00-8 TL | 6 | TURF | 700 |
| AL03164 | 20.5/8.00-10 TL | 12 | TURF | 760 |
| AL03562 | 22/11.00-8 TL |
6 | KNOBBY | 180 |
| AL03223 | 26/12.00-12 TL | 6 | TURF | 1113 |
| AL03233 | 26/12.00-12 TL | 8 | LUG | 1372 |
| ********* | ***************** | *** | *********** | ********* |
| AL03159 | 4.80/4.00-8 TL |
6 | HIGHWAY | 340 |
| AL03192 | 5.00-8 TT |
8 | HIGHWAY | 1100 |
| AL03036 | 6.00/6.90-9 TL |
10 | HIGHWAY | 690 |
| AL02868 | 4.00-8 | NA | SOLID RIB | 710@25km |
| AL03372 | 5.00-8 TT |
8 | IND BLOCK |
830 |
| AL03105 | 5.00-8 | NA | SOLID LUG | 815@25km |
| AL03376 | 6.00-9 TT |
10 | IND BLOCK | 1515 |
| AL02869 | 6.00-9 | NA | SOLID LUG | 1290@25km |
A tyre fitting service is available if tyre and wheel assemblies are required.
Shown below is a selection of popular tyre & wheel assemblies we supply for agricultural and other trailers.
Tread designs are indicative only and may change from time to time.
Photo below: 22/11.00-8 6ply knobby tyre on 8 x 7 4 hole wheel.
6.00/6.90 x 9 - 10 ply highway tyre fitted to a 4.00 x 9 five hole wheel. P.C.D. = 114.3mm (Ford)
Note: Photo below shows tyre mounted on hub.
5.00 x 8 - 8 ply highway tyre fitted to a 3.75 x 8 five hole wheel. P.C.D. = 114.3mm (Ford)
Below.
26/12.00 x 12 - 6 ply Turf Tyre fitted to a 10.00 x 12 wheel
with 5/114.3 PCD ( Ford)
Below:
26/12.00 x 12 - 8 ply Lug Tyre fitted to a 10.00 x 12 wheel
with 5/114.3 PCD ( Ford)
Some popular tyre and one pece wheel assemblies are listed below.
| PART No | TYRE | WHEEL |
| TWA0646 | 4.80/4.00x8 - 6 ply H/Way | 8x3.75-5/114.3 (Ford) |
| TWA0031 | 4.80/4.00x8 - 6 ply H/Way | 8x3.75-4/101.6 (Mini) |
| TWA0253 | 5.00 x 8 - 8 ply H/Way | 8x3.75 - 5/114.3 (Ford) |
| TWA0542 | 5.00 x 8 - 8 ply H/Way | 8x3.75-5/107.95 (HT) |
| TWA0001 | 6.00/6.90x9 - 10 ply H/Way | 9x4.00-5/114.3 ( Ford) |
| TWA0008 | 16/6.50x8 - 6 ply Turf | 8x5.375-4/101.6( Mini) |
| TWA0399 | 16/6.50x8 - 6ply Turf | 8x5.375-5/114.3 (Ford) |
| TWA0005 | 18/8.50x8 - 6 ply Turf | 8x7.00-4/101.6 (Mini) |
| TWA0437 | 18/8.50x8 - 6 ply Turf | 8x7.00-5/114.3 ( Ford) |
| TWA0007 | 20/10.00x8 - 6 ply Turf | 8x7.00 - 5/114.3 (Ford) |
| TWA0024 | 20/10.00x8 - 6ply Turf | 8x7.00 - 4/101.6 (Mini) |
| TWA0420 | 20.5/8.00x10 - 12ply Turf | 10x6.0-5/114.3 (Ford) |
| TWA0472 | 22/11.00x8 - 6 ply Knobby | 8x7.00-4/101.6 (Mini) |
| TWA0022 | 22/11.00x8 - 6 ply knobby | 8x7.00-5/114.3 (Ford) |
| TWA0050 | 26/12.00x12 - 8ply Lug | 12x10.5-5/114.3 (Ford) |
| TWA0051 | 26/12.00x12 - 6ply Turf | 12x10.5-5/114.3 (Ford) |
Tyre and heavy duty 2 piece split wheel assemblies listed below.
| PART No | TYRE | WHEEL |
| AL03234 | 4.00x8 - SOLID RIB |
3.00 x 8 2 pce 5/107.95 (HT) |
| TWA0096 | 5.00x8 - SOLID LUG |
3.00 x 8 2 pce 5/107.95 (HT) |
| TWA0026 | 5.00x8 - SOLID LUG |
3.00 x 8 2 pce 5/114.3 (FORD) |
| TWA0010 | 5.00X8 - 8ply INDUSTRIAL |
3.00 x 8 2PCE 5/107.95(HT) |
| TWA0012 | 5.00X8 - 8ply INDUSTRIAL | 3.00 x 8 2PCE 5/114.3 (FORD) |
| TWA0013 | 5.00X8 - 8ply HIGHWAY |
3.00 x 8 2PCE 5/114.3 (FORD) |
| TWA0014 | 5.00 x 8 - 8 ply HIGHWAY | 3.00 x 8 2PCE 5/107.95 (HT) |
| TWA0009 | 6.00/6.90x9 - 10 ply HIGHWAY | 4.00 x 9 2PCE 5/107.95 ( HT) |
| TWA00025 | 6.00x9 - SOLID LUG | 4.00 x 9 2PCE 5/107.95 (HT) |
| TWA0011 | 6.00X9 - 10PLY INDUSTRIAL |
4.00 x 9 2PCE 5/107.95 (HT) |
Below.
Solid 4.00 x 8 tyre on 2 piece HT pattern wheel.
