SPLINED SHAFTS AND SLEEVES
Aline Trading P/L present a selection of quality splined shafts and sleeves suitable for a wide range of Agricultural and Industrial applications.
Plain Sleeves.
Our range of plain splined sleeves are weldable and are supplied in a zinc coated finish for corrosion resistance. They can be used as they are or you can further modify them to suit your needs.
| SPLINED SLEEVES - PLAIN |
|||
| PART NO | I.D mm |
O.D. mm | LENGTH mm |
| AL00772 | 13/8' Z6 | 48 mm | 130 mm |
| AL00177 | 13/4" Z6 | 60 mm | 100 mm |
| AL01692 | 13/4" Z20 | 63 mm | 100 mm |
| AL00178 | 13/8" Z21 | 48 mm | 100 mm |
| AL00291 | 25mm Keyed | 49 mm | 60 mm |
AL00291 25mm Plain bore sleeve.
8mm Keyway. 4 x M8 tapped holes.
Clamp Bolt Sleeves.
Our range of splined sleeves with interfering clamp bolts are weldable and feature a heavy duty twin bolt external clamp allowing for a strong / positive attachment to your equipment to prevent movement and wear during operation.
| SPLINED SLEEVES - INTERFERING CLAMP BOLT | |||
| PART No | SPLINE | O.D mm | LENGTH mm |
| AL00293 | 13/8" Z21 | 50 | 100 |
| AL00297 | 13/8" Z6 | 50 | 100 |
| AL00298 | 13/4" Z6 | 63.5 | 100 |
| AL00299 | 13/4" Z20 | 63.5 | 100 |
SPLINED SHAFT.
A Range of agricultural splined shaft is held in stock.
This includes fully splined shafting and single splined shafts.
See details below.
| SPLINED SHAFTS - FULL LENGTH SPLINE |
||
| PART NO | SPLINE | LENGTH mm |
| AL00777 | 13/8" Z6 | 500 |
| AL00776 | 13/8" Z6 | 1000 |
| AL00778 | 13/8" Z6 | 3000 |
| AL01897 | 1 3/8" Z21 |
200 |
| AL00770 | 13/4" Z6 |
500 |
| AL00779 | 13/4" Z6 |
1000 |
| AL00782 | 13/4" Z6 | 3000 |
| AL00780 | 13/4" Z20 | 600 |
Below.
Fully splined shafts in 3m lengths.
Below.
P/No AL01897 13/8Z21 x 200mm splined shaft.
-----------------------------------------------------------------------------
| SPLINED SHAFTS - SINGLE OR DOUBLE ENDED | ||||
| PART No | O/A LENGTH MM | DIAMETER | SPLINE | ENDS |
| AL00775 | 600 | 13/8" | 13/8" Z6 | ONE |
| AL00771 | 2400 | 40mm | 13/8"Z6 | BOTH |
AL00775 shown below is a single ended splined shaft that can be used to suit many applications. AL00775 is a stocked size.
Other shafts can be made to order with spline at one or both ends.
When ordering single or double end splined shafts please confirm.
1. Overall Length.
2. Shaft diameter
3. Single or double end spline.
4. Spline. 13/8Z6, 13/8Z21,13/4Z20 or 13/4Z6
5. Material. Standard = Grade 1045 . Optional 4140 High Tensile.
